Out of Stock – More coming soon . . . .

Z Aqua-Thane M35 Pack comes with the M35 + Micro-Fiber Applicator Pad + Replacement Micro-Fiber Applictor Pads (2)

Normally all up this would be $127.05 (inc GST) but as the pack it is $116 (inc GST)

Z Aqua-Thane M35 is a water-borne, two-component, self cross linking polyurethane coating. It exhibits a satin finish and offers superior stain, abrasion and chemical resistance. The durability makes this sealer ideal for high-traffic areas. Z Aqua-Thane M35 is safe for indoor or outdoor use.

• Provides a matte/ satin, abrasion resistant finish.
• Very slight incidental darkening on colored concrete (no darkening on white concrete).
• Excellent chemical resistance.
• UV Resistant
• Fast drying

Coverage - 50-75 sq. ft. (4.6 – 6.9 sq m) @ 2 coats (one 1.25 qt. kit)

Aqua-Thane G40 vs. Aqua-Thane M35 - The G40 has a semi gloss finish and will darken or "wet out" the concrete very similar to when water is applied to an unsealed surface. The M35 has a matte/ satin finish with very slight darkening on colored concrete.

Note: If a darkening effect with a satin finish is desired one coat of the G40 can be used first to darken the concrete follwed by 1-2 coats of the M35 to create the satin finish. They can also be used in reverse to create a gloss finish without any darkening. For this start with at least 2 coats of the M35 (then test with water to make sure it is well sealed and no G40 will get through to the concrete), then apply 1 coat of the G40 to add a gloss layer. 

Note : Delivery fee for sealer only (1 – 2 bottles) is around the $22 – $24 mark for the majority of Australia (more for remote/regional). ie 1 Bottle of Z SiAcryl14 & a bottle of Counter Shine is $22.